Outfit Infinity Drain S-LTIF 6596 SS 96″ Site Sizable Low-Profile Tile-Insert Linear Drain Kit
Create a near-invisible shower drain with reliable flow and a wall-to-wall finish. The Infinity Drain S-LTIF 6596 SS pairs a low-profile PVC channel with a 2-1/2″ tile-insert frame in Satin Stainless so your floor tile sits inside the grate for a seamless look. This Site Sizable® kit ships in a 96″ length and can be cut to exact size on site, with two 2″ outlets you can position on the run for plumbing flexibility. Rated at 9 GPM per outlet (at the outlet), it’s a smart choice for multi-head showers using traditional (liner/pan) waterproofing. Everything mounts from the top for a clean, installer-friendly setup.
- Brand: Infinity Drain
- MPN: S-LTIF 6596 SS
- Type: Site Sizable® (S) Low-Profile Linear Drain Kit, Tile-Insert Frame
- Size/Capacity: 96″ kit; 2-1/2″ frame width; 9 GPM per outlet (two outlets included)
- Material/Finish: 12-gauge 304L stainless tile-insert frame (Satin Stainless); PVC channel
- Performance: Low-profile design; flow measured at outlet only; additional outlets can be combined into a larger waste line to increase system capacity
- Connections/Fit: Requires 2″ clamp-down floor drain with 2″ throat (not included); compatible with PVC/rubber liners, hot-mop, lead/copper, or fiberglass pans
- Dimensions: Overall length 96″; (2) grate sections each approx. 47-7/8″ L × 2-1/2″ W × 1″ H; accepts floor tile up to 3/8″ thick
- Included: (2) RA 6548 tile-insert frames; GL 6596 PVC channel; CS 6596 channel spacer; (2) EL 65 PVC stop ends; (2) SL 65 PVC outlet sections; (2) S 50 PVC threaded outlets; (2) CT 96 channel trims; ZSIKA M1 sealant; HMK-65-2A service kit with (2) HB 65 hair baskets + AKEY lift-out key
- Certifications: Not specified; follows traditional shower-pan waterproofing methods (see submittal)
- Warranty: Limited Lifetime (Infinity Drain)
Make The Drain Disappear
The tile-insert frame lets you set your floor tile directly into the grate so only a slim reveal is visible. You get a clean, uninterrupted floor surface that complements large-format tile and modern shower designs.
Low-Profile, Site-Sizable Fit
Ship at 96″ and cut on site for exact wall-to-wall spans. The 1″-tall insert frame keeps overall build-up modest, helping with transitions, while the PVC channel is easy to trim and position during layout.
Flexible Waterproofing Compatibility
Works with the traditional methods pros already use: PVC or rubber liners (Chloraloy®), hot-mop, lead/copper pans, or fiberglass. That means fewer surprises at rough-in and faster inspections on retrofit projects.
Installer-Friendly, Complete Kit
From channel trims and stop ends to the hair basket and lift-out key, the S-LTIF 6596 SS includes the pieces you need at the drain line. Just supply a 2″ clamp-down floor drain body and follow the submittal for outlet placement and rod-straight installation.
Sized For Wall-To-Wall Spans
Two 47-7/8″ tile-insert sections bridge a full 96″ opening when combined—great for long benches, curbed showers, or linear designs that run the full back wall without awkward seams.
Keep It Flowing
Each outlet is rated 9 GPM at the outlet; with two outlets in the kit, you can increase overall drain capacity when combined into a larger waste line per the submittal. The included hair baskets help maintain flow between cleanings.
Project Notes & Limits
This low-profile S-PVC kit is not intended across a barrier-free threshold. For curbless entries or modern waterproofing membranes, consider Infinity Drain’s alternate series designed for those applications.
